Application
Interfaces, Classes, Traits and Enums
- QRDataModeInterface
- Specifies the methods reqired for the data modules (Number, Alphanum, Byte and Kanji)
- LuminanceSourceInterface
- QROutputInterface
- Converts the data matrix into readable output
- BitBuffer
- Holds the raw binary data
- EccLevel
- This class encapsulates the four error correction levels defined by the QR code standard.
- ECICharset
- ISO/IEC 18004:2000 - 8.4.1 Extended Channel Interpretation (ECI) Mode
- GenericGFPoly
- Represents a polynomial whose coefficients are elements of a GF.
- GF256
- This class contains utility methods for performing mathematical operations over the Galois Fields. Operations use a given primitive polynomial in calculations.
- MaskPattern
- ISO/IEC 18004:2000 Section 8.8.1 ISO/IEC 18004:2000 Section 8.8.2 - Evaluation of masking results
- Mode
- Data mode information - ISO 18004:2006, 6.4.1, Tables 2 and 3
- ReedSolomonDecoder
- Implements Reed-Solomon decoding
- ReedSolomonEncoder
- Reed-Solomon encoding - ISO/IEC 18004:2000 Section 8.5 ff
- Version
- Version related tables and methods
- AlphaNum
- Alphanumeric mode: 0 to 9, A to Z, space, $ % * + - . / :
- Byte
- 8-bit Byte mode, ISO-8859-1 or UTF-8
- ECI
- Adds an ECI Designator
- Hanzi
- Hanzi (simplified Chinese) mode, GBT18284-2000: 13-bit double-byte characters from the GB2312/GB18030 character set
- Kanji
- Kanji mode: 13-bit double-byte characters from the Shift-JIS character set
- Number
- Numeric mode: decimal digits 0 to 9
- QRCodeDataException
- An exception container
- QRData
- Processes the binary data and maps it on a QRMatrix which is then being returned
- QRDataModeAbstract
- abstract methods for the several data modes
- QRMatrix
- Holds an array representation of the final QR Code that contains numerical values for later output modifications; maps the ECC coded binary data and applies the mask pattern
- Binarizer
- This class implements a local thresholding algorithm, which while slower than the GlobalHistogramBinarizer, is fairly efficient for what it does. It is designed for high frequency images of barcodes with black data on white backgrounds. For this application, it does a much better job than a global blackpoint with severe shadows and gradients.
- BitMatrix
- Extended QRMatrix to map read data from the Binarizer
- Decoder
- The main class which implements QR Code decoding -- as opposed to locating and extracting the QR Code from an image.
- DecoderResult
- Encapsulates the result of decoding a matrix of bits. This typically applies to 2D barcode formats. For now, it contains the raw bytes obtained as well as a String interpretation of those bytes, if applicable.
- GDLuminanceSource
- This class is used to help decode images from files which arrive as GD Resource It does not support rotation.
- IMagickLuminanceSource
- This class is used to help decode images from files which arrive as Imagick Resource It does not support rotation.
- LuminanceSourceAbstract
- The purpose of this class hierarchy is to abstract different bitmap implementations across platforms into a standard interface for requesting greyscale luminance values.
- QRCodeDecoderException
- An exception container
- AlignmentPattern
- Encapsulates an alignment pattern, which are the smaller square patterns found in all but the simplest QR Codes.
- AlignmentPatternFinder
- This class attempts to find alignment patterns in a QR Code. Alignment patterns look like finder patterns but are smaller and appear at regular intervals throughout the image.
- Detector
- Encapsulates logic that can detect a QR Code in an image, even if the QR Code is rotated or skewed, or partially obscured.
- FinderPattern
- Encapsulates a finder pattern, which are the three square patterns found in the corners of QR Codes. It also encapsulates a count of similar finder patterns, as a convenience to the finder's bookkeeping.
- FinderPatternFinder
- This class attempts to find finder patterns in a QR Code. Finder patterns are the square markers at three corners of a QR Code.
- GridSampler
- Implementations of this class can, given locations of finder patterns for a QR code in an image, sample the right points in the image to reconstruct the QR code, accounting for perspective distortion. It is abstracted since it is relatively expensive and should be allowed to take advantage of platform-specific optimized implementations, like Sun's Java Advanced Imaging library, but which may not be available in other environments such as J2ME, and vice versa.
- PerspectiveTransform
- This class implements a perspective transform in two dimensions. Given four source and four destination points, it will compute the transformation implied between them. The code is based directly upon section 3.4.2 of George Wolberg's "Digital Image Warping"; see pages 54-56.
- QRCodeDetectorException
- An exception container
- ResultPoint
- Encapsulates a point of interest in an image containing a barcode. Typically, this would be the location of a finder pattern or the corner of the barcode, for example.
- QRCodeOutputException
- An exception container
- QREps
- Encapsulated Postscript (EPS) output
- QRFpdf
- QRFpdf output module (requires fpdf)
- QRGdImage
- Converts the matrix into GD images, raw or base64 output (requires ext-gd)
- QRImage
- Converts the matrix into GD images, raw or base64 output (requires ext-gd)
- QRImagick
- ImageMagick output module (requires ext-imagick)
- QRMarkup
- Abstract for markup types: HTML, SVG, ... XML anyone?
- QRMarkupHTML
- HTML output
- QRMarkupSVG
- SVG output
- QROutputAbstract
- common output abstract
- QRString
- Converts the matrix data into string types
- QRCode
- Turns a text string into a Model 2 QR Code
- QRCodeException
- An exception container
- QROptions
- The QRCode settings container
- BitBufferTest
- BitBuffer coverage test
- EccLevelTest
- EccLevel coverage test
- ECICharsetTest
- MaskPatternTest
- ModeTest
- Mode coverage test
- VersionTest
- Version coverage test
- AlphaNumTest
- Tests the AlphaNum class
- ByteTest
- Tests the Byte class
- DataInterfaceTestAbstract
- The data interface test abstract
- ECITest
- Tests the ECI class
- HanziTest
- Tests the Hanzi/GB2312 class
- KanjiTest
- Tests the Kanji class
- NumberTest
- Tests the Number class
- QRDataTest
- QRMatrixTest
- Tests the QRMatrix class
- QREpsTest
- Test abstract for the several (built-in) output modules, should also be used to test custom output modules
- QRFpdfTest
- Tests the QRFpdf output module
- QRGdImageGIFTest
- Tests the QRGdImage output module
- QRGdImageJPGTest
- Tests the QRGdImage output module
- QRGdImagePNGTest
- Tests the QRGdImage output module
- QRGdImageTestAbstract
- Tests the QRGdImage output module
- QRImagickTest
- Tests the QRImagick output module
- QRMarkupHTMLTest
- Tests the QRMarkup output module
- QRMarkupSVGTest
- Tests the QRMarkup output module
- QRMarkupTestAbstract
- Tests the QRMarkup output module
- QROutputTestAbstract
- Test abstract for the several (built-in) output modules, should also be used to test custom output modules
- QRStringJSONTest
- Tests the QRString output module
- QRStringTestAbstract
- Tests the QRString output module
- QRStringTEXTTest
- Tests the QRString output module
- QRCodeReaderGDTest
- Tests the GD based reader
- QRCodeReaderImagickTest
- Tests the Imagick based reader
- QRCodeReaderTestAbstract
- Tests the QR Code reader
- QRCodeTest
- Tests basic functions of the QRCode class
- QROptionsTest
- QROptions test
- QROptionsTrait
- The QRCode plug-in settings & setter functionality
- QRMaxLengthTrait
- Trait QRMaxLengthTrait